Advances in imagining and sonic technology have long been embraced by engineers and are being used every day to help evaluate buildings and building systems. These gadgets can allow for an in-depth minimally invasive, and cost-effective inspection with rapid results. Plus, it\’s fun to pull out a toy that you might see in an action movie to help figure out a problem. The following are found in most local consultant\’s arsenals. 

While technology is great, we do not rely exclusively on the digital output. The best diagnostic tools we use are still those we are born with – eyes, ears, fingers, and brain. When an engineer combines their innate detective skills with modern gadgets, we begin to resemble a human Swiss Army Knife and can arrive at a solution for your building problem.

gadgets Inspection Gadgets
gadgets Inspection Gadgets

Thermal Camera

Police, military, and ghost hunters use them and so do engineers. Infrared thermography allows us to \”see\” hot and cold areas and can allow for a rapid scan of a room, roof, electrical panel, radiator, or a building facade for thermal anomalies. These normally are found to be air and water leaks and help pinpoint locations that should be inspected more thoroughly. Blue areas are cold and red are hot.

gadgets Inspection Gadgets

Moisture Meter

Used to measure the moisture content of wood, drywall, and other building materials to help narrow down if a water leak is active and where it may be coming from.

gadgets Inspection Gadgets


Unmanned flying aircraft are now easier to maneuver and can take high-resolution digital video and photos, which al­lows for the inspection of a roof or building exterior when access is extremely difficult or limited. Government regula­tions are still in a state of flux related to this equipment, but the rules are getting clearer as time goes on.

gadgets Inspection Gadgets


Spy movies show the hero inserting a fiber optic cable under a door or through an air vent to look into a room. Engi­neers use this same technolo­gy to look behind walls or under floors by drilling a small hole instead of making a large opening.

gadgets Inspection Gadgets

Ground Penetrating Radar

The same technology that al­ lows police to scan a field for objects buried underground is used by engineers to emulate Superman and see what is in concrete. The 3-D version can generate an image of what is embedded in a concrete slab.

gadgets Inspection Gadgets

Ultrasonic Thickness Gauge

Measures the wall thickness of pipes or other metal objects using sound waves to help de­termine if they are corroded/damaged, inside, without having to remove a piece of the material.


This device uses a special hammer and sound waves to measure the thickness of concrete and find buried defects that are not visible to the human eye by simply tapping the surface.

By Christopher W. Carlson, P.E. SECB

Chris has been practicing structural engineering for over 24 years and is focused on the evaluation and repair of defects on existing buildings. He is the Chief Structural Engineer with ETC, Inc. and oversees the structural staff activities.
Inspection Gadgets

7165 Columbia Gateway Drive
Columbia, Maryland  21046
phone: 410.312.4761
fax: 410.312.0482

Northern Virginia
46040 Center Oak Plaza
Suite 100
Sterling, Virginia 20166
phone: 703.450.6220
fax: 703.444.2285